Splicer Data Explorer is a support application of the fusion splicers.

   This application can operate S123 series, S153 series and S178 series
   It dosen't operate in other fusion splicer series.



  

・Software Update

   It updates the fusion splicers from the internet.
    The latest software can be checked at any time.
    (It can use it from all software version. )

・Remote Control
    It can remote controlled by virtual SW on the PC.
    The character edit and the image capture from PC.
    (It can use it only from the software version
      that supported. )

・Splice Information Check
    It can check automatically saved splicer information.
    (It can use it only from the software version
      that supported. )

    It is necessary to meet requirements to use Splicer Data Explorer.
    Check your fusion splicer's software version, and verify requirements.
   
If software version do not comply with requirements, it cannot use all function of Splicer Data Explorer.

 
   It is necessary for fusion splicer to be higher
   than complicated software version to use all function of
   Splicer Data Explorer.

  
It can use "Software Update" in all software version.
Fusion Splicer
Software Version
S178
A04(or above)
S153
A04(or above)
S123C/M4
A05(or above)
S123M8/M12
A03(or above)
NJ001A01(or above)
 
CPU INTEL Pentium4R 2.0 GHz class system
MEMORY
256 MB (512 MB recommended)
HDD
50 MB
OS
Windows XP SP3
Windows Vista SP2
Windows 7 SP1
Windows 8
USB Port
USB 2.0
etc
Direct X:  9.0d(and above)
.NET framework:  3.5 SP1
Microsoft Excel:   2000 (or above)

      It can download application and document with the confirmation of the latest update.
      If your PC needs to install the DirectX and .NET Framework, download a files form URL link.
 

 Updated Fusion Splicer Information. (23/12/2015)
 Updated Fusion Splicer Information. (31/08/2015)
 SDE supported new splicer NJ001. (25/03/2015)
 Updated Fusion Splicer Information. (11/03/2015)
 Updated Fusion Splicer Information. (23/12/2014)
 SDE fixed Update Function Issue. (04/08/2014)

 

 
Title
Version
Size
Date
Splicer Data Explorer 1.3.3 0.6MB
25/03/2015
 
User's manual Rev.3 1.0MB
24/06/2013
 
USB drivers Rev.3 3.8MB
24/06/2013
All files packed
-
5.0MB
25/03/2015
 

 
Fusion Splicer Ver Update
S178A A17 11/03/2015

S153A A10 06/12/2013

S123C/M4 A10 29/01/2014
 
S123M8/M12
A06-04
17/06/2013
NJ001A0623/12/2015

  Adobe Systems Inc. (United States)
  Microsoft Download Center (United States)
  .NET Framework Developer Center (United States)




      Choose a used function.







Q.1
PC doesn't recognize the fusion splicer.
A.1
Check a COM port number.

  The port of COM31 or more cannot be recognized in Splicer Data Explorer.

  Running device manager to chech a USB port number.
   << Change Settings for a COM. (Microsoft) >>


Q.2
An error is displayed when operate "Remote Display".
A.2
Change setting of the PC display.

  Open a setting page.

    XP
    (“Control panel > Appearance and Themes > Display > Settings > Advanced > Troubleshoot”)

    Vista/7
    (“Control panel > Display > Resolution > Advanced > Troubleshoot”)


  Move the slider bar of “Hardware acceleration” on 2nd or 3rd scale from "None".

  Remove the check from “Enable write combining”.

  Press the OK button to reflect.

   

  *Return setting after use.


Q.3
The application doesn't respond.
A.3
Reconnet a USB cable after pull out from PC.

  If the error pop up is displayed, reconnet a USB cable after select "Continue" button.


Q.4
It was connected to the Internet, but cannot acquire a file information.
A.4
Check a setting of firewall on your PC.

  Splicer Data Explorer cannot connect with the Internet depending on PC environment of
   the use it may become the security setting.


  Check Splicer Data Explorer is set by the setting of the fire wall by "permission"

 
<< Windows Firewall >>




  This homepage optimizes it to work by the following browsers.
 ・Microsoft Internet Explorer 8 later
 ・Mozilla Firefox 3.0 later
 ・Opera 10.0 later
 ・Safari 4 later
 ・Google Chrome 4.0 later